Seven matching antique cast iron 4” hinges with steeple finials, dating from the 1880’s. The hinges are ornamented with a gorgeous vine design. The center of the  More »

Seven matching antique cast iron 4” hinges with steeple finials, dating from the 1880’s. The hinges are ornamented with a gorgeous vine design. The center of the hinge features an abstract pattern that runs from finial to finial and is repeated on the back of the hinge (pictured). These Eastlake hinges are in excellent condition, and measure 4” wide overall, 4” tall, and 6-3/4” from finial to finial. THE PRICE LISTED IS FOR EACH HINGE; THERE IS NOW ONLY ONE AVAILABLE. NHP59-RW   « Less

Two matching antique door hardware sets, circa 1905, with doorknobs and plates. The doorplates feature an elegant volute design with a crown of leaves at the bottom; the  More »

Two matching antique door hardware sets, circa 1905, with doorknobs and plates. The doorplates feature an elegant volute design with a crown of leaves at the bottom; the doorknobs feature a fourfold volute pattern. These doorknob sets are in very good antique condition with an aged finish. The hardware has been lacquered to prevent rust. The door knobs measure 2 1/4” in diameter and 2 1/4” deep; the plates are 7 1/2” by 2 1/2”. Each set includes a pair of doorknobs with the connecting rod and set screws, and a pair of doorplates. THE PRICE LISTED IS FOR EACH SET; THERE IS NOW ONE SET AVAILABLE. Antique mortise locks or modern latches for use with this hardware are also available. NDKS79   « Less

Hard-to-find antique cast bronze door hardware sets by Mallory, Wheeler, & Co., patent dated 1884, in their unusual “Arabic” design. Each set includes a pair of  More »

Hard-to-find antique cast bronze door hardware sets by Mallory, Wheeler, & Co., patent dated 1884, in their unusual “Arabic” design. Each set includes a pair of door knobs, a pair of plates, one decorative mortise lock, and a rare decorative strikeplate (enough hardware for one door). The knobs and plates feature an Arabic character on a rippled background. The backplates and lock are signed “M.W.” This hardware is in very good to excellent condition, with the expected scratches on the strikeplates and some tiny nicks on the edge of one lock (pictured). Each doorknob is 2 ¼” in diameter and 2” deep; the backplates measure 1-11/16” by 5 1/4". The faceplates of the mortise locks are 5 ½” by 7/8”, and each lock has a backset of 2-3/8”. THE PRICE LISTED IS FOR EACH SET; THERE ARE NOW FOUR AVAILABLE. NDKS81-RW   « Less

Unusual antique Arts and Crafts door hardware sets, dating from the early 1900’s. The doorknobs feature a threefold design with leaves overlapping a simple border;  More »

Unusual antique Arts and Crafts door hardware sets, dating from the early 1900’s. The doorknobs feature a threefold design with leaves overlapping a simple border; the backplates are ornamented at the top and bottom with a matching leaf design and a triple border. Each plate is 7 ¾” by 2 ½”; the doorknobs are 2 ¼” in diameter and 2” deep. Each set includes a pair of plates and two knobs with the connecting spindle and screws (enough hardware for one door). THE PRICE LISTED IS FOR EACH SET; THERE IS ONE SET AVAILABLE. Antique mortise locks and modern latches are also available for use with this hardware. NDKS82-RW   « Less

A stunning antique entry cast bronze door hardware set in P. & F. Corbin’s “Tivoli” pattern, featured in the 1905 Corbin catalog. The doorknobs feature a  More »

A stunning antique entry cast bronze door hardware set in P. & F. Corbin’s “Tivoli” pattern, featured in the 1905 Corbin catalog. The doorknobs feature a flower surrounded by acanthus leaves and ribbon, with a beaded border around the edge. The plates are ornamented with a beautifully cast anthemion on one end, surrounded by acanthus, with acanthus leaves and scrolls on the opposite end. The plates have a bead-and-reel border. The split-system lock has its original lock cylinder and escutcheon, and a cast bronze faceplate. This entrance door hardware is in excellent condition. The larger doorplate is 13” by 3 1/4”; the smaller plate is 7” by 2 1/4”; the larger doorknob is 2 ½” in diameter and 2 ¼” deep; the smaller doorknob is 2 ¼” in diameter and 2 ¼” deep. The faceplate on the lock is 9” by 1 ¼”. A matching, slightly smaller hardware set for a vestibule door or side door is also available, item # NDKS84-RW. NDKS83-RW   « Less

A stunning antique exterior cast bronze door hardware set in P. & F. Corbin’s “Tivoli” pattern, featured in the 1905 Corbin catalog. The doorknobs feature  More »

A stunning antique exterior cast bronze door hardware set in P. & F. Corbin’s “Tivoli” pattern, featured in the 1905 Corbin catalog. The doorknobs feature a flower surrounded by acanthus leaves and ribbon, with a beaded border around the edge. The plates are ornamented with a beautifully cast anthemion on one end, surrounded by acanthus, with acanthus leaves and scrolls on the opposite end. The plates have a bead-and-reel border. The split-system lock has its original lock cylinder and escutcheon, and a cast bronze faceplate. There is a small piece missing from the latch on the lock (pictured), which does not affect the functionality of the lock; everything else is in excellent condition. The larger doorplate is 10 1/4” by 2 3/4”; the smaller plate is 7” by 2 1/4”; the doorknobs are 2 ¼” in diameter and 2 ¼” deep. The faceplate on the lock is 7 3/8” by 1 ¼”. This set was originally used on a vestibule door and could also be used for a side door; the matching larger hardware set from the front door is also available, item # NDKS83-RW. NDKS84-RW   « Less

A gorgeous antique Art Nouveau door hardware set in P. & F. Corbin’s “Lorraine” (or “Loraine”) pattern, with a pair of doorknobs and the  More »

A gorgeous antique Art Nouveau door hardware set in P. & F. Corbin’s “Lorraine” (or “Loraine”) pattern, with a pair of doorknobs and the matching backplates. Circa 1905, the back plates feature an anthemion at the top and the bottom, surrounded by volutes and intricate foliate detail. The door knobs feature a threefold looped border intertwined with leaves. This hardware is in excellent condition. The plates are 2 ½” wide and 8 ½” tall, and the doorknobs are 2 ¼” wide and 2 ¼” deep. The set includes a pair of knobs, a pair of plates, and the connecting spindle with set screws. This door hardware is suitable for installation in a modern door using our latch set or antique mortise locks. NDKS85-RW   « Less

Early 1900’s cast brass door hardware sets in a classic egg-and-dart design. Featuring very detailed casting, this antique hardware is heavy and excellent quality.  More »

Early 1900’s cast brass door hardware sets in a classic egg-and-dart design. Featuring very detailed casting, this antique hardware is heavy and excellent quality. The doorplates and doorknobs both feature an egg-and-dart border with a textured center. The door knobs are 2 ¼” in diameter and 2” deep; the plates are 7 ¼” by 2 ½”. Each set includes two backplates and a pair of knobs with their connecting spindle and set screws (enough hardware for one door). THE PRICE LISTED IS FOR EACH SET; THERE IS NOW ONE SET AVAILABLE. Antique locks or modern latches for use with these sets are also available. NDKS87-RW   « Less

Antique 1890’s cast bronze door hardware set in the fleur-de-lis pattern by Mallory, Wheeler, & Co. The doorplates feature a design of fleur-de-lis, chain links, and  More »

Antique 1890’s cast bronze door hardware set in the fleur-de-lis pattern by Mallory, Wheeler, & Co. The doorplates feature a design of fleur-de-lis, chain links, and abstract detail on a textured background; the knobs have a fourfold fleur-de-lys design. The plates are signed M.W. Co. The door knobs measure 2 ¼” in diameter and 1 7/8” deep; the plates are 1 5/8” by 5 1/8”. This door hardware set includes a pair of doorknobs with the connecting rod and set screws, and a pair of doorplates. Antique locks or modern latches for use with these sets are also available. NDKS88-RW   « Less

Two matching antique doorknob sets with matching doorplates, circa 1910. The doorknobs feature a daisy in the center with a simple border; the plates have an arch at the top  More »

Two matching antique doorknob sets with matching doorplates, circa 1910. The doorknobs feature a daisy in the center with a simple border; the plates have an arch at the top and bottom, ornamented with a matching flower. The door knobs measure 2 1/4” in diameter and 2 1/4” deep; the plates are 7 ¼” by 2 3/8”. Each door hardware set includes a pair of doorknobs with the connecting rod and set screws, and a pair of doorplates. THE PRICE LISTED IS FOR EACH SET; THERE IS NOW ONLY ONE SET AVAILABLE. Antique mortise locks or modern latches for use with this hardware are also available. NDKS89   « Less